Microprocessor PID controller Fuzzy-Logic LCD display Keypad Timer up to 0-999h59m Real-Time Clock Programming: 50 Programs with 15 steps (Temperature, Gradient, Time, Fan Speed) S 232 Interface 1 or 2 shelves
The special characteristic of this multi-functional drying and heating cabinet is found in its unique and patented system named «All in door». This Swiss development provides the TC 40 and the TC 100 with some important advantages in comparison with units of conventional design. Maximum temperature +200°C.
The «All in door» system is responsible for making the TC 40 and the TC 100 one of the most compact units in their volume class. First and foremost, the system guarantees full versatility in terms of chamber equipment. Lead troughs are feasible almost anywhere.
SalvisLab Thermocenter is setting standards in quality as well as in design. The units are manufactured in renowned Swiss quality according to International standards and excel through precision, reliability and design.
All technical components (heater, ventilator and controller) are located inside the door. The door is fastened to the housing by four screws and may easily be removed. Thus, maintenance becomes extremely easy and maintenance cost becomes negligible.
Special insulation technology applied with the TC 40 and TC 100 keeps heat where it belongs, namely in the chamber. The door seal guarantees excellent tightness transition from housing to front door. Low energy consumption is guaranteed.
Thermocenter
The SalvisLab Vacucenter represents the optimal solution for oxidation sensitive substances and thermally instable products. It provides precise thermal conditions in dust-free vacuum atmosphere. These characteristics enable highly successful vacuum drying applications for a wide range of laboratory applications in areas such as chemical engineering, pharmaceuticals, foodstuffs, cosmetics and electronics industry. The carefully designed wall heating system can be controlled within 0.1°C and ensures stable temperature conditions over the entire shelf area ranging up to + 200°C.
SalvisLab Vacucenter meets GLP and GMP standards.
The Vacucenter feature an exclusive pressure safety system. The viewing window consists of double pane safety glass. SalvisLab Vacucenter is classified in Safety Class 3.1.
The chamber interior is made of high quality stainless steel. The insert shelves are manufactured from anodised aluminium, thus enabling efficient heat transfer and best chemical resistance.
Return to atmospheric pressure is enabled by means of a precision needle valve for ambient air or inert gas. A cleverly designed input jet behind a fender plate permits pressurization of the chamber without causing turbulence.
Vacucenter
SalvisLab Incucenter is highly accurate and especially designed for incubation in clinical and industrial laboratories. The exclusive IntelliFan-System provides uniform and constant level temperature conditions at all locations within the chamber – independent of load. High degree of precision is warranted over the full temperature range. The inner door made of safety glass permits optical process monitoring without heat loss. For decontamination purposes, the units can be heated up to + 110°C.
SalvisLab Incucenter is setting standards in quality as well as in design. The units are manufactured in renowned Swiss quality according to International standards and excel through precision, reliability and design.
Each Incubator comes with two grid shelves as standard equipment. They are designed for high payload and enable an unimpeded airflow.
50 programs at 15 program steps each (set temperature, gradient, hold time, fan speed) can be stored with a Maximum program duration of 999 hours 59 minutes. The integrated Real-Time-Clock simplifies programming. All programs remain stored in case of power failure.
The EasyMenu developed by SalvisLab enables intuitive programming of the SalvisLab Incucenter. In just a few easy steps, temperature, gradients, hold time and fan speed can be determined. The LCD display keeps you informed with all the desirable data over the entire process cycle.
Incucenter
SalvisLab Incucenter ICN are our precise natural convection Incubator series. The ICN is especially designed for the long-term and continuously stable incubation in basic research / research institutes, food and beverage industry as well as microbiology laboratories. The exclusive EasyMenu controller from SalvisLab provides an uniform constant level of temperature conditions at any and all locations within the chamber. Ideal for gentle incubation of organism as well as conditioning of heat-sensitive media for microbiological heating. The inner glass door made of safety glass permits optical process supervision without heat energy loss. For support of decontamination the units can be heat up to + 80°C.
SalvisLab Incucenter are setting standards in quality and design. The units are manufactured in typical Swiss quality according to ISO 9001 norms and convince of accuracy, dependability and design.
Each Incubator comes with two wire shelves as standard equipment. They are designed for high payload and their grid design allow unimpeded air convection. The unique SalvisLab door system makes the ICN incubator to one of the most compact units in their volume class.
50 programs at 15 program steps each (set temperature, gradient, hold time, fan speed) may be stored in SalvisLab Incucenters with a program duration up to 999 hours 59 minutes. The built-in realtime clock simplifies programming. In case of power failure, the Incucenter will restart automatically.
SalvisLab developed the EasyMenu which leads you through operation and programming of the Incucenters in plain steps. The illuminated LCD display of the PID controller features fuzzy logic capabilities and keeps you informed with all required data during the full process cycle. Serial interface RS 232. SalvisLab Software (STS) is optional available for programming and data logging according to 21 CFR part 11 (GLP/GMP/FDA conform)
Incucenter Natural
SalvisLab Biocenter BC190 is the ideal CO2 incubator for all cell and tissue cultures. The innovative and reliable concept ensures optimal conditions for your applications. A fan less, six-sided heat system ensures stable homogenous environment, thus reducing the risk of contamination to a minimum. Constant conditions for temperature, CO2 and humidity are kept independent of the load. Up to 95% Rh achieved within a completely dry wall chamber.
SalvisLab Biocenter is setting standards in quality and design. The units are manufactured in high quality and convince through accuracy, reliability and design.
The interaction of the temperature probe, IR sensor and software warrants precise operating conditions. In case of any temperature deviation, the independent safety loop takes over.
The electro-polished and deep drawn inner chamber made of stainless steel allows an easy cleaning and eliminate source of contamination.
The EasyMenu takes you through the operation of the Biocenter in easy to follow steps. The illuminated Touch panel keeps you informed of the required process data and graphs during the entire operating cycle.
Programming the Biocenter could not be simpler. The automatic alarm system can be adapted to the individual needs of the user. The sophisticated software monitors all functions of the Biocenter. All datas can be stored through the ethernet access port or the SD card plug.
The inner glass door allows viewing access to the samples while maintaining complete sample and environmental integrity.
The PT 100 probe as well as the IR-sensor drift free guarantee precise condtions. In case of any deviation the additional autonomous security cycle will take over.
The Heatingcenter HC120 is a heating cabinet especially designed for hospitals, retirement homes, Spa’s and fitness centres to warm up towels, bed sheets and bottles etc. with a temperature range of up to +80°C
The HC 120 is a multi talent, when it comes to warming up goods.
SalvisLab Heatingcenter is setting standards in quality as well as in design. The units are manufactured in renowned Swiss quality according to ISO 9001 standards and excel through easy handling and dependability.
Special insulation technology applied with the HC120 keeps heat where it belongs, namely on the inside. Low energy consumption is guaranteed.
SalvisLab Heatingcenter are easy to clean.
The unit is constructed for non-stop operation. The integrated thermostat combined with the insulation assures that the heating cycle is as short as possible and runs just when the temperature drops under the required temperature.
The Heatingcenter as well as the shelves are made of high quality stainless steel.
Heatingcenter
All above named models can be used as built-in under sink or as free standing. LCD display, 20 basic and 20 customised washing programs for laboratory glassware. Temperature monitoring with 2 probes (PT 1000). Serial Interface RS 232, Washing and rinsing temperature are fully adjustable up to + 93°C.
LED display. Editable air drying programs. Drying on two levels with jet pipe racks at the same time It is an ideal completion with the SC 1160
Cleaners
SalvisLab Waterbath is used as an approved universal aid for reliable temperature examinations in laboratories. The different sizes (10, 20 or 40 litres) allow multifunctional applications.
The integrated circulation pump (only at WB 20 and WB 40) guarantees an optimal temperature uniformity by maximal test tube load.
The temperature is actuated over a microprocessor with integrated PID-controller. The application with the easy readable LED-display allows a simple set-actual value analysis at any time. The integrated protection against over temperature offers an additional security.
The deep drawn, polished water tank and the easy removable sieve bottom, both from high class stainless steel DIN 1.4301 allow a simple and efficient cleaning.
SalvisLab Waterbath set standards in quality and design. The units are manufactured in Swiss quality and captivate with precision and reliability.
Watercenter
About SalvisLab Renggli AG, founded in 1927, is an established Swiss family enterprise with international orientation in the realm of complete laboratory solutions. As one of the leading European manufacturers and market leaders in Switzerland, Renggli designs and implements state-of-the-art laboratories for research, industry, medicine and education.
With the renowned SalvisLab trademark, Renggli develops and produces a range of drying- and vacuum ovens, incubators, CO2 incubators, heating cabinets, water baths and laboratory cleaning machines. SalvisLab products are distributed world-wide through our international network of dealers.
4536 N FEDERAL HIGHWAY FORT LAUDERDALE, FL 33308
E-MAIL : INFO@ANA-CHEM.COM TEL: +1 (954) 772 6671 FAX: +1 (954) 533 2256
Biocenter
Biocenter Advantage